Your shopping cart is empty!


WELCOME TO

Luthier Decals and

Sticker Creation "Words that Stick"


free shipping worldwide yuminashi

Clear Vision

Show:
Sort By:
Liquid Glass Windshield Glass Repair LG1

           Liquid Glass

Click here to watch Liquid Glass Video

The Quick Fix is designed to keep the windshield from continuing to crack once hit by a  stone or small rock etc. When the Liquid Glass is placed over the damaged area, the adhesive on the underside melts with sunlight or heat from the inside of the car and fills the pot hole in the windshield caused by the stone. It acts like an epoxy and dries crystal clear and when fully dry, is invisible to the eye. It never becomes discolored blocking the view from the driver.

You simply clean the surface where the stone hit the windshield, apply the label over the damaged area and allow to cure on the windshield. The curing process is usually 24 hours, but you can leave it on the windshield for as long as 7 - 10 days. After this period, simply peel off the clear label leaving the cured adhesive to protect the windshield from cracking any further. 

Liquid Glass saves you money by not having to rush in to a dealer or company that repairs windshields, which we all know costs lots of money. Our Liquid Glass is only designed for small pot marks that will eventually become cracks in the windshield, and not for large cracked areas where it is inevitable that the windshield has to be replaced.

  1. Dries crystal clear and not visual to the eye
  2. Fills the damaged area leaving a smooth protected finish
  3. Keeps the cracked windshield from spreading
  4. Protects the area from all elements 

UV adhesive  automobile glass repair adhesive through bonding process to deal with glass cracks or small wounds, the operation time is short, will not affect the daily use of the car. 

Develop different optimal repair plans for different situations of your wound to ensure that the wound heals to the greatest extent. automobile glass is mainly to fill the liquid colloid in the crack and eliminate the gap.

The product is characterized by low viscosity, strong permeability, easy to penetrate into the small cracks in the windshield, high transparency, refractive index and glass. Ultraviolet radiation can solidify rapidly, and the strength can reach more than 90% of the original glass. 

How to use?

1: Clean the chip crack or bulls eye area with the supplied Alcohol swab

2: Cut a small piece of plastic wrap/Saran Wrap larger than the area to be repaired

3: Remove the lid from the liquid Glass tube

4: Apply Liquid Glass on the chip, crack or bulls eye…allow enough to cover the area and a little extra

5: Apply the plastic wrap or saran wrap over on top the Liquid Glass massaging it into the area

6: Apply a few drops of Liquid Glass into the supplied suction cup

7: Push the suction cup onto the wrap and gently pull up on the suction cup. This will allow the Liquid Glass

     to go into the crack.   

8: Remove the suction cup and smooth out the plastic wrap

9: Let sit in the direct sun or a uv light for 72 hours

10: The remove the plastic wrap and smooth the glass with the Liquid Glass. If there is still a pit you can put a few

      Drops of Liquid Glass and let sit again for 72 hours and then scrape smooth with the supplied razor blade…then your done!

   Liquid Glass will only dry in the direct sun or with a UV light. It will not dry if let in an area where there is no sun or uv light.

It will stay wet forever unless in direct sunlight or uv light...

CAD9.00

Liquid Glass Windshield Glass Repair LG2

           Liquid Glass

Click here to watch Liquid Glass Video

The Quick Fix is designed to keep the windshield from continuing to crack once hit by a  stone or small rock etc. When the Liquid Glass is placed over the damaged area, the adhesive on the underside melts with sunlight or heat from the inside of the car and fills the pot hole in the windshield caused by the stone. It acts like an epoxy and dries crystal clear and when fully dry, is invisible to the eye. It never becomes discolored blocking the view from the driver.

You simply clean the surface where the stone hit the windshield, apply the label over the damaged area and allow to cure on the windshield. The curing process is usually 24 hours, but you can leave it on the windshield for as long as 7 - 10 days. After this period, simply peel off the clear label leaving the cured adhesive to protect the windshield from cracking any further. 

Liquid Glass saves you money by not having to rush in to a dealer or company that repairs windshields, which we all know costs lots of money. Our Liquid Glass is only designed for small pot marks that will eventually become cracks in the windshield, and not for large cracked areas where it is inevitable that the windshield has to be replaced.

  1. Dries crystal clear and not visual to the eye
  2. Fills the damaged area leaving a smooth protected finish
  3. Keeps the cracked windshield from spreading
  4. Protects the area from all elements 

UV adhesive  automobile glass repair adhesive through bonding process to deal with glass cracks or small wounds, the operation time is short, will not affect the daily use of the car. 

Develop different optimal repair plans for different situations of your wound to ensure that the wound heals to the greatest extent. automobile glass is mainly to fill the liquid colloid in the crack and eliminate the gap.

The product is characterized by low viscosity, strong permeability, easy to penetrate into the small cracks in the windshield, high transparency, refractive index and glass. Ultraviolet radiation can solidify rapidly, and the strength can reach more than 90% of the original glass. 

How to use?

1: Clean the chip crack or bulls eye area with the supplied Alcohol swab

2: Cut a small piece of plastic wrap/Saran Wrap larger than the area to be repaired

3: Remove the lid from the liquid Glass tube

4: Apply Liquid Glass on the chip, crack or bulls eye…allow enough to cover the area and a little extra

5: Apply the plastic wrap or saran wrap over on top the Liquid Glass massaging it into the area

6: Apply a few drops of Liquid Glass into the supplied suction cup

7: Push the suction cup onto the wrap and gently pull up on the suction cup. This will allow the Liquid Glass

     to go into the crack.   

8: Remove the suction cup and smooth out the plastic wrap

9: Let sit in the direct sun or a uv light for 72 hours

10: The remove the plastic wrap and smooth the glass with the Liquid Glass. If there is still a pit you can put a few

      Drops of Liquid Glass and let sit again for 72 hours and then scrape smooth with the supplied razor blade…then your done!

   Liquid Glass will only dry in the direct sun or with a UV light. It will not dry if let in an area where there is no sun or uv light.

It will stay wet forever unless in direct sunlight or uv light...

 

CAD11.00

Liquid Glass Windshield Glass Repair LG3

           Liquid Glass

Click here to watch Liquid Glass Video

The Quick Fix is designed to keep the windshield from continuing to crack once hit by a  stone or small rock etc. When the Liquid Glass is placed over the damaged area, the adhesive on the underside melts with sunlight or heat from the inside of the car and fills the pot hole in the windshield caused by the stone. It acts like an epoxy and dries crystal clear and when fully dry, is invisible to the eye. It never becomes discolored blocking the view from the driver.

You simply clean the surface where the stone hit the windshield, apply the label over the damaged area and allow to cure on the windshield. The curing process is usually 24 hours, but you can leave it on the windshield for as long as 7 - 10 days. After this period, simply peel off the clear label leaving the cured adhesive to protect the windshield from cracking any further. 

Liquid Glass saves you money by not having to rush in to a dealer or company that repairs windshields, which we all know costs lots of money. Our Liquid Glass is only designed for small pot marks that will eventually become cracks in the windshield, and not for large cracked areas where it is inevitable that the windshield has to be replaced.

  1. Dries crystal clear and not visual to the eye
  2. Fills the damaged area leaving a smooth protected finish
  3. Keeps the cracked windshield from spreading
  4. Protects the area from all elements 

UV adhesive  automobile glass repair adhesive through bonding process to deal with glass cracks or small wounds, the operation time is short, will not affect the daily use of the car. 

Develop different optimal repair plans for different situations of your wound to ensure that the wound heals to the greatest extent. automobile glass is mainly to fill the liquid colloid in the crack and eliminate the gap.

The product is characterized by low viscosity, strong permeability, easy to penetrate into the small cracks in the windshield, high transparency, refractive index and glass. Ultraviolet radiation can solidify rapidly, and the strength can reach more than 90% of the original glass. 

How to use?

1: Clean the chip crack or bulls eye area with the supplied Alcohol swab

2: Cut a small piece of plastic wrap/Saran Wrap larger than the area to be repaired

3: Remove the lid from the liquid Glass tube

4: Apply Liquid Glass on the chip, crack or bulls eye…allow enough to cover the area and a little extra

5: Apply the plastic wrap or saran wrap over on top the Liquid Glass massaging it into the area

6: Apply a few drops of Liquid Glass into the supplied suction cup

7: Push the suction cup onto the wrap and gently pull up on the suction cup. This will allow the Liquid Glass

     to go into the crack.   

8: Remove the suction cup and smooth out the plastic wrap

9: Let sit in the direct sun or a uv light for 72 hours

10: The remove the plastic wrap and smooth the glass with the Liquid Glass. If there is still a pit you can put a few

      Drops of Liquid Glass and let sit again for 72 hours and then scrape smooth with the supplied razor blade…then your done!

   Liquid Glass will only dry in the direct sun or with a UV light. It will not dry if let in an area where there is no sun or uv light.

It will stay wet forever unless in direct sunlight or uv light...

 

CAD14.00

Corporate Email

 

Logo Sales and Design

Email: Logos@What-IfProductions.com

Corporate

Email: Tim@What-IfProductions.com

Sticker Creation

Email: Stickers@What-IfProductions.com

 

SiteMap

WHO WE ARE

 

We are a Canadian based company with a

passion for guitars, manufacturing and worldwide distrubution.

 Our service goes beyond the sale and shipping. Top Quality

product and service is just the beginning. We manufacture

Guitar Decal Waterslide Headstock logos for Fender Guitar Decals,

Stratocaster Guitar Decals, Telecaster Guitar Decals, Gibson Decals,

Epiphone Decals. Guitar Waterslide Decal Headstock logos for all over the world.

   Our company is also the inventors of Glow Bear.  www.What-IfProductions.com

and we have a world vision with product in every country in the world! 

   Also check out our "Words that Stick"...its amazing how a simple word can light

bring light to a dark day.

10 instagram 03 youtube 02 facebook 01 twitter

SHIPPING

GuitarDecals

English Arabic French German Italian Russian Spanish
© 2019. All Rights Reserved.

Search


Guitar Decal and Adhesive Sticker Restoration Decals

FREE WORLDWIDE SHIPPING!

Words Header