Tips on how to apply a waterslide decal
Watch Our video: https://www.youtube.com/watch?v=xDQIEwyt-M8&feature=youtu.be
1: Each waterslide logo has already been coated with two coats of clear, which will protect the logo
during shipment and installation.
2: Trim as much of the clear from the logo with smooth cutting don’t leave any edges.
3: Never install a waterslide logo onto fresh wood, always make sure there is a coat of clear on the
wood and allow it to dry for 24 hours before applying waterslide logo.
4: After you apply the logo using the online instructions, look at your logo under a bright light at an
angle to ensure the logo is laid flat and no ripples. Pat wrinkles with a paper towel…never use your hands.
5: Allow the logo to dry for 24 hours before putting on your first “Light” coat of clear. The 24 hours is
important so all the water can evaporate from under the logo. Do not rush this step.
6: After 24 hours spray your first misting of clear on your project to seal the logo, then allow another 8-12 hours of dry time. Steps 5 and 6 I find
are the two most important steps. I know how exciting it is to get the logo in place and start putting the clear on it but “Patience” is the key
to a professional application.
7: You can also visit you tube and search "How to apply a waterslide Decal"
Note:
1: We give a full money back warranty on our decals except custom orders, no exceptions...we are not resposible if the decal does not look like the image in your head thought it would look.
2: We do not pay for return shipping that is always the buyers resposibility
3: Foil decals do not use ink and you will see the ribbon lines on the white paper till installed
4: We sell inkjet, Laser and heat sublimation...each one serves a different purpose...if you have a question please ask.
5: We do not give money back on used decals
6: Please read the tips that come with each decal...always apply a coat of your clear to the decal before application
7: Shipping can take 4-30 days...fast or slow mail is out of our control
